8068 Phone Displays BAD TFTP

[Gerry]

I have programmed a set with Static Configuration.
IP Address is static on local network
Gateway and Subnet mask is correct
TFTP is statically set and correct.
Release: l1.301.26a (11.1)
Have 4028 on same location that is working fine .
The 8068 displays BAD TFTP.

Any Ideas??

Gerry

[enio.eltz]

Do you have any trace to check?

[tot3nkopf]

Check the lanpbx configuration.
Any security features activated on the switch port?

[nperalta]

check vlan, and routing to oxe, tracert to oxe from a pc.