Hi All
I have an OXO rel7.0. There is 6 Ip phones and 1 T2 ISDN trunks.
Ihave ordered extra license and hardware for Automated Attendant. Alcatel has sent 1 XMEM cardand 1 harddisk attached to the XMEM card.
I cannot connect VOIP card XMEM card and Harddisk together.
What sould I do?
Beacuse of this hardware incompatibility system is giving Software key problem messages in IP phones.\
Thanks
VOIP, XMEM AND HARDDISK
Re: VOIP, XMEM AND HARDDISK
Hi ACFE
Remove xmem from hd and put voip in that place.
HD doesn't need xmem to work. It needs only the cable connection. This connection voip card also has.
Regards.
Remove xmem from hd and put voip in that place.
HD doesn't need xmem to work. It needs only the cable connection. This connection voip card also has.
Regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
Re: VOIP, XMEM AND HARDDISK
Thanks,
However there is no any cable connection. There is a special connection card daughterboard which connects VOIP card and HD.
Can I use that connection card?
However there is no any cable connection. There is a special connection card daughterboard which connects VOIP card and HD.
Can I use that connection card?
Re: VOIP, XMEM AND HARDDISK
Hi
Is SATA your HD? If yes you must use that daughter board.
Is SATA your HD? If yes you must use that daughter board.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
Re: VOIP, XMEM AND HARDDISK
Hi.
and read this TC.
and read this TC.
You do not have the required permissions to view the files attached to this post.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
ACFE OXE R12
ACFE OXO C R3
Re: VOIP, XMEM AND HARDDISK
Thanks
I will aplly this tomorrow and I will let you know.
Thank you very much
I will aplly this tomorrow and I will let you know.
Thank you very much