VOIP, XMEM AND HARDDISK

Post Reply
acfe

VOIP, XMEM AND HARDDISK

Post by acfe »

Hi All

I have an OXO rel7.0. There is 6 Ip phones and 1 T2 ISDN trunks.

Ihave ordered extra license and hardware for Automated Attendant. Alcatel has sent 1 XMEM cardand 1 harddisk attached to the XMEM card.

I cannot connect VOIP card XMEM card and Harddisk together.

What sould I do?

Beacuse of this hardware incompatibility system is giving Software key problem messages in IP phones.\

Thanks
User avatar
enio.eltz
Senior Member
Posts: 1058
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: VOIP, XMEM AND HARDDISK

Post by enio.eltz »

Hi ACFE

Remove xmem from hd and put voip in that place.

HD doesn't need xmem to work. It needs only the cable connection. This connection voip card also has.

Regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
acfe

Re: VOIP, XMEM AND HARDDISK

Post by acfe »

Thanks,

However there is no any cable connection. There is a special connection card daughterboard which connects VOIP card and HD.
Can I use that connection card?
User avatar
enio.eltz
Senior Member
Posts: 1058
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: VOIP, XMEM AND HARDDISK

Post by enio.eltz »

Hi

Is SATA your HD? If yes you must use that daughter board.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
User avatar
enio.eltz
Senior Member
Posts: 1058
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: VOIP, XMEM AND HARDDISK

Post by enio.eltz »

Hi.

and read this TC.
You do not have the required permissions to view the files attached to this post.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
acfe

Re: VOIP, XMEM AND HARDDISK

Post by acfe »

Thanks

I will aplly this tomorrow and I will let you know.

Thank you very much
Post Reply

Return to “Hardware”