Load Balancing across links in a linkaggregation

[silvio]

your config for lacp 2 on this site is fine:
-> lacp linkagg 2 size 4 admin state enable
-> lacp linkagg 2 actor admin key 20
-> lacp agg 1/5 actor admin key 20
-> lacp agg 1/6 actor admin key 20
The traffic will be load balanced over both ports. You don't need any additional commands for it.
regards Silvio

[cedric1]

switch balance traffic to all memeber up on the link agg instance, 2 in your case.

you have nothing to do more.
Primary is what : port on wich stp bpdu will pass through.

Cedric

[agungaryo]

thank you everyone,I get it now.


regard ,
agung aryo