Hi,
the OXE supports encryption between the IP phones and between the OXE gateway and the IP phone. Therefore there seems to be that Thales box (SSM).
But does it support SIPS and SRTP encryption between it and a SIP provider? My SIP provider does support SRTP and SIPS,so?
I can´t find any description about this feature. If sou
Encryption: Alcatel OXE <=> SIP Provider
-
cavagnaro
Re: Encryption: Alcatel OXE <=> SIP Provider
I believe not. This is a question made by a customer and presales guys told not to be an option right now. However with R9 and new features (still have to get documentation) wouldn't be surprised that something is around there.
-
Kinne_DUP
Re: Encryption: Alcatel OXE <=> SIP Provider
Hi cavagnaro,
thanks for your answer. I was looking for a solution and found
http://www1.alcatel-lucent.com/enterpri ... ber_09.pdf
If you look at page 12, you see that a session border controller with support of SRTP/TLS is mentioned: "SIP TLS, sRTP (version 5.2)" is mention. Which version 5.2 are they referring to?
thanks for your answer. I was looking for a solution and found
http://www1.alcatel-lucent.com/enterpri ... ber_09.pdf
If you look at page 12, you see that a session border controller with support of SRTP/TLS is mentioned: "SIP TLS, sRTP (version 5.2)" is mention. Which version 5.2 are they referring to?
-
cavagnaro
Re: Encryption: Alcatel OXE <=> SIP Provider
Interesting...I would have to guess they refer to the session border controller. I will show this to the jackass of ALU who told us not possible and ask him for more info...will let you know.
-
knightr1der
Re: Encryption: Alcatel OXE <=> SIP Provider
cavagnaro wrote:...I will show this to the jackass of ALU who told us not possible and ask him for more info...will let you know.
<off topic>
This should be interesting... a dog is going to have a conversation with a donkey!... can't wait!
-
root
Re: Encryption: Alcatel OXE <=> SIP Provider
OXE does not support SIPS / SRTP to secure SIP calls, but you could take any SBC
and declare this SBC under address to protect as an OTUC server, with this configuration
the voice from IPTouch to the SBC is encrypted. I've seen this configuration working,
but it's not supported by ALU
of course you need a MSM box in front of your SBC and remember the limit of 250
calls per MSM box
The example in the pdf show only SIPS / SRTP from the SBC to other SIP equipment
which mean that it's not secured in your network, but behind the SBC.
So with a MSM in front of the SBC you could secure the voice on both sides.
and declare this SBC under address to protect as an OTUC server, with this configuration
the voice from IPTouch to the SBC is encrypted. I've seen this configuration working,
but it's not supported by ALU
of course you need a MSM box in front of your SBC and remember the limit of 250
calls per MSM box
The example in the pdf show only SIPS / SRTP from the SBC to other SIP equipment
which mean that it's not secured in your network, but behind the SBC.
So with a MSM in front of the SBC you could secure the voice on both sides.
-
root
Re: Encryption: Alcatel OXE <=> SIP Provider
Neotip SBC?Kinne wrote: Which version 5.2 are they referring to?
