Suite setup in room management & Internal Metering

[ike2000]

Hi

1.

I have a system setup in room management( mainly because of PMS limitations).
In each room i have one ip-phone and one analogue. The client wants the ip-phone to ring at the same time as the analogue, but i can not create a suite as i am not in Guest Management mode.

Can someone help with a possible solution

2.

Is it possible to have metering on internal calls ( extension to extension) , if possible how ?


Thanks in advance

[tot3nkopf]

Ideas:

1.
Incoming calls:
-use set supervision with ring on digital set supervising the analog set
-also tick take supervision at off hook on digital set parameters
Outgoing calls:
-from analog no problem
-force the digital set to substitute with the analog extension (you can use hotline feature -routing at off hook- for that - for immediate substitution)

2.
You need local calls metering license for that.

Regards.

[oldboy]

Why can you not turn on Suite feature in the hotel parameters, reset the system and away you go. Create you GPINS create room extns, tie them together under Hotmenu and all good. Dont forget though once Suite feature is on every room will require a GPIN....

[tot3nkopf]

Why can you not turn on Suite feature in the hotel parameters, reset the system and away you go. Create you GPINS create room extns, tie them together under Hotmenu and all good. Dont forget though once Suite feature is on every room will require a GPIN....

He said he cannot due to PMS limitation.

[oldboy]

whats the issue you can do everything through Hotmenu..no need at all for a PMS system

[tot3nkopf]

whats the issue you can do everything through Hotmenu..no need at all for a PMS system

tell that to a receptionist used only to make a check in on the front desk computer and he will hang you