regarding vlan on oxe

kenzo_DUP · Post by **kenzo_DUP** » 31 Oct 2005 12:17

would like to segment our voice and data into different segment by means of VLAN. As such, please take this into consideration in preparing a IP phone network design. Please provide us the necessary information (e.g. what is the IP address range you required, number of VLAN segment, etc) required in order for our vendor to prepare the switch. The switch which we will be using is the Cisco Catalyst 4506 with 2x 48-ports (10/100/1000) PoE modules and 1x 48 ports (10/100/1000) normal Ethernet module.

anyone can help on this thanks

Post by **frank** » 31 Oct 2005 21:21

Your vendor should provide you the informations needed..

kenzo_DUP · Post by **kenzo_DUP** » 31 Oct 2005 21:25

on my site what i need to configure for VLAN

Post by **frank** » 31 Oct 2005 21:29

Your cisco catalyst is a serie 4500.
Serie 4500 is vlan capable (IEEE 802.1Q).
You just need a CCNA to configure it

kenzo_DUP · Post by **kenzo_DUP** » 31 Oct 2005 21:33

ok thank.

On the mgr oxe side do i need to configure anything thanks

Post by **frank** » 31 Oct 2005 21:36

You will need to configure the VLan on the IP phones.......

kenzo_DUP · Post by **kenzo_DUP** » 31 Oct 2005 21:38

ok will do how about the DHCP side at mgr........
it so simple to set.....

Post by **frank** » 31 Oct 2005 21:41

If you go DHCP, you just have to manage the DHCP vlan, that's all

kenzo_DUP · Post by **kenzo_DUP** » 31 Oct 2005 21:44

mean to say the vendor need to give me the range IP Address......public

Post by **frank** » 31 Oct 2005 22:00

No, no public address !
The IP phone should be in a private network.
Choose something like 192.168.x.x