represent

Post by **frank** » 03 Aug 2005 19:09

I just leaned that new one

represent gives a list of the demi-com (half-com) actually in use.
You will see who is calling who. Then use eqstat n xxxxx to find who's the number calling/called

la_toupie · Post by **la_toupie** » 04 Aug 2005 13:22

It's the same thing ''listincall'', isn't it ?

Post by **frank** » 04 Aug 2005 13:43

listincall gives you too much shit

represent is much more clearer

Just a personal choice

arctus · Post by **arctus** » 05 Aug 2005 12:22

I mostly use "t3 |grep _NUMBER" to trace calls in real time. You can even trace digits as they are being typed into the set! I will also try "represent" and see what it can do for me.

Post by **frank** » 05 Aug 2005 13:06

You can see digits are they are dialed ONLY if you use NO OVERLAP I think. If you use Overlap, the PBX will send all at once..

Alejandro · Post by **Alejandro** » 17 Oct 2005 04:20

How to stop command "t3 |grep _NUMBER"?

tia

Post by **vad** » 17 Oct 2005 07:42

"DEL" or "CTRL-C"

Alejandro · Post by **Alejandro** » 17 Oct 2005 12:31

Thanks, vad.

"DEL" worked fine, but not "CTRL-C".

Thanks again.

Post by **vad** » 17 Oct 2005 23:16

DEL for Chorus (up to R50.1Ux), Ctrl-C for Linux (from R5.0Lx).