It's been a long battle, but we moved again our server to another cloud service, protecting ourselves from (sadly) Chinese IP Addresses, which would bring down AlcatelUnleashed. Hopefully, this is now under control. Feel free to contact us through the CONTACT US link at the bottom of this page if you have any question. Happy browsing!

Forward DID to SIP trunk

anoop401
Member
Posts: 10
Joined: 04 Jun 2021 12:08

Forward DID to SIP trunk

Post by anoop401 »

Hi all,
I have virtualized an OXE and Elastix servers, both run fine and well. Now I am in a need to forward the DID number to the OXE to the SIP trunk (Used to connect the Elastix). Actually this is a test setup, if succeeds will be put to production.
Any help is greatly appreciated.
thanks and regards
anoop

Ps: Step by step instruction is not necessary, tips may work.
haroun
Senior Member
Posts: 1455
Joined: 29 Mar 2010 11:09

Re: Forward DID to SIP trunk

Post by haroun »

NOT CLEAR
is this the wanted scenario?
DID---(isdn or pcm trunk)-->OXE>----sip---->>Elastix-extension
the received did should be translated at oxe level (external numbering plan /did trans) to the elastix extensio n , wich should known in OXE as network number or joined by routing number at translator /prefix plan
anoop401
Member
Posts: 10
Joined: 04 Jun 2021 12:08

Re: Forward DID to SIP trunk

Post by anoop401 »

Yes, this is the scenario. Thanks for the reply. Let me try.
haroun
Senior Member
Posts: 1455
Joined: 29 Mar 2010 11:09

Re: Forward DID to SIP trunk

Post by haroun »

qReview/Modify: Numbering_Plan_Descriptor (NPD)qqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x Instance (reserved) : 1 x
x Description identifier : 35 x
x x
x Name : Algerie_Telcom x
x Calling Numbering plan ident. + NPI/TON Isdn National x
x Called numbering plan ident. + NPI/TON Isdn National x
x Authorize personal calling num use + True x
x Install. number source + NPD source x
x Default number source + NPD source x
x Called DID identifier : 2 x
x Calling/Connected DID identifier : 2 x
x Installation number : 03XXX x
x Default number( num. inst. sup.) : 2XXX x

x
lqReview/Modify: DDI number translator rulesqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x Instance (reserved) : 1 x
x DDI num. transl. identifier : 2 x
x First External Number : 2000 x
x x
x First Internal Number : 18 x
x Range Size : 1 x
x Unique Internal Number + YES


Validating the DID TRANSCODING USE IN THE TRUNKGP 1800
DDI transcoding + True

NPD Selection at TRKGP

Node Number (reserved) : 1 x
x Trunk Group Id : 1800 x
x Instance (reserved) : 1 x
x x
x Public NPD id : 35 x
x Private NPD id : 0 x
x Management Mode + Normal
haroun
Senior Member
Posts: 1455
Joined: 29 Mar 2010 11:09

Re: Forward DID to SIP trunk

Post by haroun »

Some number are joined by
Numbering Planqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x Number : 2000 x
x x
x Prefix Meaning + Network No. x
x Identifier of Domain : 0 x
x Network Number : 14 x
x Node Number/ABC-F Trunk Group : 1799 x
x Number With Sub Address (ISDN) + NO x
x Type + Fax Server x
x Identifier : 0

OR BY
qReview/Modify: Numbering Planqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x x
x Node Number (reserved) : 1 x
x Instance (reserved) : 1 x
x Number : 3898 x
x x
x Prefix Meaning + Routing No. x
x Identifier of Domain : 0 x
x Network Number : 14 x
x Node Number/ABC-F Trunk Group : 1799 x
x Number of Digits : 8 x
x Number With Sub Address (ISDN) + NO x
x Default X25 Id.pref. + NO x
x
anoop401
Member
Posts: 10
Joined: 04 Jun 2021 12:08

Re: Forward DID to SIP trunk

Post by anoop401 »

There is a toll free number comes to the OXE end, I need to route that to an Elastix Call center, that is the prime target. Once the testing successful, I will put it in to the OXE (Real hardware). Now OXE (vm) to Elastix and vice versa ok.
Regards.
anoop
rand1Poo
Member
Posts: 1
Joined: 03 Mar 2022 08:26
Location: NYC USA

Re: Forward DID to SIP trunk

Post by rand1Poo »

Thanks for the helpful information
anoop401
Member
Posts: 10
Joined: 04 Jun 2021 12:08

Re: Forward DID to SIP trunk

Post by anoop401 »

Hi all, after days long research following Mr Harouns directions, i was able to direct the PSTN no to my Asterisk server through OXE, many thanks for it. I'm asking one more favor, as mentioned the incoming calls are working as it should, but no success with out going, any one can shed some light ?
regards,
anoop
vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3851
Joined: 23 Sep 2004 06:47

Re: Forward DID to SIP trunk

Post by vad »

what is your problem with outgoing calls? You cannot dial, or send wrong calling number? Or something else.
anoop401
Member
Posts: 10
Joined: 04 Jun 2021 12:08

Re: Forward DID to SIP trunk

Post by anoop401 »

Hi,
Tnx for the response Mr Vad, When I dial from my Asterisk server it doesn't go out. TCPdump shows the information does reach there, but not getting processed anyway. Actually I am no more in a VM, so I cant just do whatever comes to my mind. We only have the basic skills to manage the OXE, like ext creation and alike. Incoming calls from the Telecom provider works like a charm, I'm sure its a configuration issue. It would be great if anyone could say where to look or what to change.
thanks and regards,
anoop
Post Reply

Return to “GENERAL”