Omnisswitch 6850E/24 not booting

Post Reply
ZeeroMX

Omnisswitch 6850E/24 not booting

Post by ZeeroMX »

Hello

I'm having some trouble with a 6850E from a customer not booting.

when i try to power on the switch this is all the information displayed from serial console

Code: Select all

U-Boot (6.4.4.213.R01) (for OS6400, OS6850, and OS6855 platforms) (Jan 27 2011 - 05:18:45)

MPC8247 Reset Status: External Soft, External Hard

MPC8247 Clock Configuration
 - Bus-to-Core Mult 4x, VCO Div 2, 60x Bus Freq  25-75 , Core Freq 100-300
 - dfbrg 0, corecnf 0x1a, busdf 3, cpmdf 1, plldf 0, pllmf 3
 - vco_out  400000000, scc_clk  100000000, brg_clk  100000000
 - cpu_clk  400000000, cpm_clk  200000000, bus_clk  100000000
 - pci_clk   66666666

CPU:   MPC8247 (HiP7 Rev 14, Mask 1.0 1K50M) at 400 MHz
Board: Alcatel-Lucent OS6850E (Kite2E)
I2C:   ready
DRAM:  512 MB
it only display up to the DRAM: 512 MB info

i checked some of the other posts here and it seems that there is more information displayed even when the switch does not boot right but on this case it only displays that, I think that maybe if the flash information cannot be displayed and the boot process does not go after that info, the flash is dead, but I'm not expert on alcatel switches, so I ask if anyone knows if there is anything that can be done with the switch or if it is dead.

after displaying that info, switch becomes unresponsive, no more info is displayed and no response to anything on serial console.

thanks for any help you may provide.
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 2110
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Omnisswitch 6850E/24 not booting

Post by silvio »

Maybe the flash is broken after 10 years working - or something similar (I see that the miniboot is not loaded from the flash). So I think its time for a new switch.
best regards
Silvio
ZeeroMX

Re: Omnisswitch 6850E/24 not booting

Post by ZeeroMX »

Thanks for the reply, the customer has new Switches but this happened before the change.

So, if the flash Is dead, there Is no chance to change it and back to work?

Flash is not a card on this switch?

Sorry, not much into Alcatel Switches, want to know just because i'm curious.
silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 2110
Joined: 01 Jul 2008 10:51
Location: Germany

Re: Omnisswitch 6850E/24 not booting

Post by silvio »

not sure about 6850E ... open the switch and you will find it out. In older switches (than 6850E) I have seen CF-cards inside. But anyway it will be difficult to find replacement for the card.
BR Silvio
ZeeroMX

Re: Omnisswitch 6850E/24 not booting

Post by ZeeroMX »

ok, thanks for your reply.
Post Reply

Return to “OmniSwitch 6850 / 6850E”