OS6900 Virtual-chassis VF-LINK problem

[pobboy89209]

"Virtual-chassis" Configration

But, "Vf-Link" Can Not Connecting

Only. Link status Up, / VF-Link Status Down

AOS Version 7.3.4.450.R01 GA

See Log

-----------------------------------------------------------------------------------------------------------------
Fri Aug 12 13:21:55 : vfcn main error message:
+++ [vfccQsHandleLinkEvents:327] VFCC : gport 18 LINK UP Invalid Speed 0 CANNOT GET

Fri Aug 12 13:21:55 : vcmCmm vfl warning message:
+++ CMM:vcmCMM_process_vfl_member_diag@2360: Non-operational VFL member (chasId 1, vfl 0, port 1019, status 2)

Fri Aug 12 13:21:55 : vfcm main error message:
+++ [vfccQsHandleLinkEvents:327] VFCC : gport 18 LINK UP Invalid Speed 0 CANNOT GET

--------------------------------------------------------------------------------------------------------

I can not solve this problem,

Physical GBIC and Cable is changing

The same Log output

------------------------------------------------------------------------------------------------------

-> show interfaces status
Chas/ DETECTED-VALUES CONFIGURED-VALUES
Slot/ Admin Auto Speed Duplex Pause Speed Duplex Pause Link
Port Status Nego (Mbps) (Mbps) Trap EEE
--------+------+----+--------+------+-------+--------+------+-------+-----+---
1/1/1 en dis - - - 10000 Full - dis dis
1/1/2 en dis - - - 10000 Full - dis dis
1/1/3 en dis - - - 10000 Full - dis dis
1/1/4 en dis - - - 10000 Full - dis dis
1/1/5 en dis - - - 10000 Full - dis dis
1/1/6 en dis - - - 10000 Full - dis dis
1/1/7 en dis - - - 10000 Full - dis dis
1/1/8 en dis - - - 10000 Full - dis dis
1/1/9 en dis - - - 10000 Full - dis dis
1/1/10 en dis - - - 10000 Full - dis dis
1/1/11 en dis - - - 10000 Full - dis dis
1/1/12 en dis - - - 10000 Full - dis dis
1/1/13 en dis - - - 10000 Full - dis dis
1/1/14 en dis - - - 10000 Full - dis dis
1/1/15 en dis - - - 10000 Full - dis dis
1/1/16 en dis - - - 10000 Full - dis dis
1/1/17 en dis - - - 10000 Full - dis dis
1/1/18 en dis - - - 10000 Full - dis dis
1/1/19 en en 1000 Full - 10000 Full - dis dis
1/1/20 en dis - - - 10000 Full - dis dis

Interface status Up .....

-> show virtual-chassis vf-link member-port
VFLink mode: Auto

Chassis/VFLink ID Chassis/Slot/Port Oper Is Primary
-------------------+------------------+----------+-------------
1/0 1/1/19 Down No


Vf-link Status Down .... Why Down ?...

two Device same Status

What do I need to check?...
--------------------------------------------------------------

[pobboy89209]

This problem was resolved
10G GBIC problem
10G GBIC 10EA full set is recognized as 1G GBIC
It is properly recognized by other vendors 10G GBIC

[silent]

VFL need to use 10G speed.

[devnull]

VFL need to use 10G speed.

or 40G.

So no original "Alcatel" SFP? -> Your fault

[silent]

VFL need to use 10G speed.

or 40G.

So no original "Alcatel" SFP? -> Your fault

ha....yes, I'm lost 40G.

[pobboy89209]

I did not use a dedicated Alcatel GIBC ..

Although China using a supported GBIC,

GBIC that was recognized as 10G SFP + 1G.

Having lived in another test normal 10G GBIC