Omni Pcx Office Small issue

[atcmatteo]

Hallo Guys

i found in my new office an omnipcx small date 28/2006 soft rel R400/16.5

don't know his history, it turns on, power led became green, cpu led flashes, if i connect lan cable to my router lan led flashes.

I have instaled OMC 10.1.22.1a but i can't connect it, i've tried lot of tricks , passwords found on the net, lot of options but never had an answer from the PCX.

I'm doing something wrong or there's a problem in the hardware?

Hope someone could help me to understand what i can do to fix it.

I would like use it for a small business office with only a line via gsm-4G

Many thanks in advance!!!!!

[cavagnaro]

Do you know the ip address? If not, plug it to your computer and then run a sniffer like wireshark. Then turn on your OXO. It will broadcast its ip address and you will be able to see it

Enviado de meu C6603 usando Tapatalk

[atcmatteo]

Do you know the ip address? If not, plug it to your computer and then run a sniffer like wireshark. Then turn on your OXO. It will broadcast its ip address and you will be able to see it

Enviado de meu C6603 usando Tapatalk

Thanks a lot!
I'm trying right now

let me see...

[atcmatteo]

Tried a lot of combinations, nothing to do to access...
i have this error message from OMC: "HTTPS [login 4] - Soap login error - Error Code"
I used default password found on installation manual : help1954 and pbxk1064.
Nothing to do...
help!

[maxmania]

Hi!

You are using one of the last versions of OMC, try to connect using compatibility with older versions ( an option during connection setup) or get a db9 to rj45 rs232 converter and try co connect via V24 console.

Enviado do meu Edison 3 através de Tapatalk

[maxmania]

And the default password for the OMC is pbxk1064, unless you chance the OMC DLL to become administrador versions!!!

Enviado do meu Edison 3 através de Tapatalk

[atcmatteo]

I think the OEM password was changed, now I don't have any problem on ip, so should be the wrong password.
I'm reading about LOLA tweak but i understood that i'll lost all the data inside to replace the factory passord.
At now i'm thinking to put it in the trash and buy a small device to support calls by gsm 4g sim card. Hope will be the cheapest solution.

All your suggestions are very appreciate!
tks Guyz

[maxmania]

You allways can ask to Alcatel to reset the installer default password. There are a specifc foarm to do that. It you are not Alcatel certify, contacto a local partner to request the installer password reset.

Enviado do meu Edison 3 através de Tapatalk

[19Homer73]

You have Soft Rel. R400/16.5, that means, you can't use an OMC.
You have to use PM5, which is the parent configuration tool.
Is the pbx an OxO or the old 4200?
There is a tool for the 4200 to find out the right password.

[atcmatteo]

You have Soft Rel. R400/16.5, that means, you can't use an OMC.
You have to use PM5, which is the parent configuration tool.
Is the pbx an OxO or the old 4200?
There is a tool for the 4200 to find out the right password.

don't know if oxo or 4200... how i can understand it?