INTIP3 Configuration

Post Reply
philasphe

INTIP3 Configuration

Post by philasphe »

Trying to do static configuration on INTIP3, The numbers e.g. for IP address do not appear - see attached.
I even connected the board to a network switch, still the same.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
tgn
Member
Posts: 803
Joined: 30 Dec 2009 17:59
Location: Germany

Re: INTIP3 Configuration

Post by tgn »

thiy will be done by mgr if the intip is not in a cpu position...

regards...
--- back to basics... focus your eyes to the essential things... ---
Top
Post Reply

Return to “IP”