Caller Name Display over QSIG Protocol

[angelo0716]

Greetings to all!

I've been taking too much time in researching over the net and manuals regarding this issue.

I have an Alcatel 4400 OXE Rls. 6.2 linked with Alcatel OXO via DLT2 card (PRI link). These two systems are interfaced with 2 Cisco Routers using QSIG protocol.
The dialing at both sides are ok. The extensions 2XXXX from OXE can dial 3XXXX in OXO and vice versa. However, the calling name at both sides are not displaying.
Only the extensions are displayed. From where i could manage to display the calling name? Is it possible at both sides to display the calling name and extension no.?

Appreciate your immediate response to resolve this issue. Thanks in advance.

Angelo