Cannot get the INTIP(2) to the network

Are you having any trouble while you are configuring a 4400 on site ? Share it with us, maybe someone will have the solution !
Post Reply
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3386
Joined: 06 Jul 2004 00:18
Location: New York
Contact:
Contact frank

Cannot get the INTIP(2) to the network

Post by frank »

Another trouble today that I finally understood:

The customer had a INT-IP2 that he could not get access to.
Everything was all right (Always remember to check the jumpers by the way!). The ethernet cable is going to an Alcatel Omnicore.. Well.. If it does not work, set up your laptop with the INT-IP2 IP address, and plug it (the laptop) to the Core. It will activate the port. Once it is done, just plus the INT-IP2 and everything should work !

:idea:
Code Free Or Die
Top
Post Reply

Return to “ON SITE TROUBLES”