TG name on 4029 display

[enio.eltz]

Hi

I have a doubt about trunk groups and 9 series.

I set a PCM R2 in a trunk group number 1. When I do an external call through this TG, when the call is answered, 4029's display shows the trunk group name. I would like it shows the dialed number.
Is it possible? I searched in the system program but I didn't find anything.

Thanks.

[mujib.alu]

Hi Enio,

try this, it works with IP Touch..!!

System \ Other System Parameters \ Attendant Parameters \ Display number during conversation.

Plz..Confirm..Back....!!

[mustafa.ahmad]

The solution given by mujib is working fine with 9 series sets ..

[mujib.alu]

Hi ,

I hope this function not available at 4035 sets..

try..

[enio.eltz]

Hi

System \ Other System Parameters \ Attendant Parameters \ Display number during conversation

I tried this option but no success. Does it need reset? The 4029 sets aren't attendants.

Thanks.

[mujib.alu]

Hi Enio,
OXE release..?

Tested with rel 9 onwards..!!

[enio.eltz]

Hi

R9.1_i1_605_25_a.

[mujib.alu]

Hi Enio,

It should work..!!

check this ,, system/othersystem param : NB digits displayed on sets:20

It's working with 8&9 series phones (Users)

[enio.eltz]

Hi

I will try this, it seems this option is righter than the another.

Thanks.