compatibility issue between pc installer and windows 7

johnsontiam · Post by **johnsontiam** » 25 May 2010 04:33

hi friends,

i wonder anyone ever experienced or have information regarding pc installer with windows 7,
i tried it already and it doesn't work.
i use the same method and it succeed with pc installer on windows XP.
FYI, my pc installer version is 2.26.
Please do advice.
Many Thank's

Best Regards,
Johnson

swinstation · Post by **swinstation** » 26 May 2010 00:19

I tried and I don't have problem what is your problem (pic)?

johnsontiam · Post by **johnsontiam** » 26 May 2010 23:40

oh..really you can?!?
what version of PC installer do you use friend?
i just try it on my vmware, but it doesn't work,
just stop there.
but it work perfectly fine if i use PC installer on XP, for OXE vmware also.
it just like it's not connect at all, the pc installer and the OXE.
it won't communicate at all.
thank's

swinstation · Post by **swinstation** » 27 May 2010 03:38

hi i use version 2.23 if you ca not connect to crystal ! you should type your install procedure 2 or 3 time after that you can connect easily I tried it yesterday it is necessary to mention when I connect to common hardware it connects at frist time but for crystal you should follow procedure 2 or 3 time.tell me more about your pbx to solve problem

johnsontiam · Post by **johnsontiam** » 27 May 2010 06:05

i haven't got the chance to use on real pbx, like common /crystal or appliance server,
so far i only tried to my OXE vmware,
i'll try to real pbx next time.
thank's friend.
cheers.

swinstation · Post by **swinstation** » 27 May 2010 09:28

it is necessary to mention when I connect to common hardware it connects at first time but for crystal you should follow procedure 2 or 3 time.i mean about follow procedure is: with out disconnecting pc installer you should type tell version or %62.0 on com port connection session and please check your services.msc after running pc installer.

cwsonline · Post by **cwsonline** » 07 Jun 2010 14:36

I am also having this problem. I cannot seem to perform a new install using PC Installer 2.26 with Windows 7 x64. It seems that the CPU is never seen by the DHCP server in PC Installer. I have confirmed that:
1. Windows Firewall and the firewall installed as part of antivirus suite are disabled.
2. Computer Browser service is started.
3. wperl, dhcpd, ftpd, and tftp processes appear after I have started Linux and Call Handling.

I have reproduced this problem on another system with Windows 7.

I have also tried with and without static addresses on PC Installer system. Does anyone have any ideas? Thank you.

swinstation · Post by **swinstation** » 08 Jun 2010 00:55

I think it dose not work with X64 bit.

Reinoud · Post by **Reinoud** » 05 Jul 2010 18:08

If you just want to load a patch, you can use filezilla. Create an anonymous account and point it to the right drive...

cwsonline · Post by **cwsonline** » 06 Jul 2010 11:28

Loading a patch works fine with PC Installer with Windows 7 x64. It's a new install that does not work so far. I have only been able to get as far as having DHCP work when starting PC Installer in Windows XP compatibility mode.