DLT2 not working

Post Reply
wallacezammit
Member
Posts: 206
Joined: 02 Nov 2009 02:30

DLT2 not working

Post by wallacezammit »

Hi,

I changed a PRA-T2 board to a DLT2 board by soldering together the citroen strap number 2 as shown in the documentation.

When plugged in the system is recognising there is a DLT2 board and it is also accepted.

But then in the access/trunks it is not shown. Also all Leds on the board remain switched off.

DO you have any idea if there is something else to do to get it to work?

regards
Wallace
Top
User avatar
Krusty65
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 242
Joined: 26 Sep 2007 13:30
Location: Normally in a comms room

Re: DLT2 not working

Post by Krusty65 »

I might be wrong but the channels on a DLT2 are a licensed feature, also what slot do you have the card plugged into.

You might find some info if you go through the logs

K.
When I was a boy of fourteen, my father was so ignorant I could hardly stand to have the old man around.
But when I got to be twenty-one, I was astonished at how much the old man had learned in seven years.
Top
Post Reply

Return to “Configuration”