Bonjour,
J'ai un poste (141) sur lequel je dois programmer un renvoi auto sur messagerie (500) 1/2 journée par semaine.
J'ai peu voire pas de connaissance sur la programmation (je sais juste programmer le poste opérateur, notre standard).
Merci d'avance.
--
Hi,
I have a phone (141) on which I must activate the voicemail (500) half a day once in a week.
I know just a few things about time programmation (I just know how to do it with my operator phone).
Thank you.
Pragrammation mevo poste/ Voicemail programming
-
- Member
- Posts: 27
- Joined: 21 Nov 2012 04:21
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7013
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Pragrammation mevo poste/ Voicemail programming
Hummm no way to do it automatically. Or you enable it or disable it.
Maybe you can do a cron job on Linux to run a linux script made by mgr.
Enviado de meu E6633 usando Tapatalk
Maybe you can do a cron job on Linux to run a linux script made by mgr.
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Pragrammation mevo poste/ Voicemail programming
hi, if you send the incoming call into internal ARS you can route based on time (and I think date). you could make one mode normal and the other mode go to a virtual that has vicemail that is monitored.
if it needs to be manual then forward the set to vocemail and leave the current routing in place,
if it needs to be manual then forward the set to vocemail and leave the current routing in place,
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
-
- Member
- Posts: 27
- Joined: 21 Nov 2012 04:21
Re: Pragrammation mevo poste/ Voicemail programming
Thank you for your replies.
Seems to be very difficult to settle...
I'm not a good OXO admin
Seems to be very difficult to settle...
I'm not a good OXO admin

- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7013
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: Pragrammation mevo poste/ Voicemail programming
Ups...sorry my answer was for OXE...my bad. Dismiss mine please
Enviado de meu E6633 usando Tapatalk
Enviado de meu E6633 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
Re: Pragrammation mevo poste/ Voicemail programming
me neither (mr bluff my way around them) but Im sure an oxo expert here could give a better description of the internal ars feature.
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
-
- Member
- Posts: 27
- Joined: 21 Nov 2012 04:21
Re: Pragrammation mevo poste/ Voicemail programming
Thank you !
I realized I maybe was not clear enough about my problem description in english.
By writing "I must activate the voicemail (500) half a day once in a week", I was thinking about an automatic call forwarding during this interval of time.
Regards.
I realized I maybe was not clear enough about my problem description in english.
By writing "I must activate the voicemail (500) half a day once in a week", I was thinking about an automatic call forwarding during this interval of time.
Regards.