CONFIGURACION DE PROTOCOLO R2 EN OXO

Post Reply
jantoniojimenez

CONFIGURACION DE PROTOCOLO R2 EN OXO

Post by jantoniojimenez »

Hola, atiendo a un cliente con un OXO R10 en Mexico, el Carrier que le da servicio publico es Marcatel en una troncal digital con protocolo R2 M y recientemente al generar una llamada saliente y colgar, el contador del tarificador no se detiene y envia llamadas de duracion de hasta 24 horas. El telefono si marca colgado y la llamada si finaliza pero la informacion enviada al tarificador es como lo relato.

Pienso que es una falla en el protoclo pero no logro ubicar la señal a considerar para solucionar este tema.

Saludos.
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7013
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: CONFIGURACION DE PROTOCOLO R2 EN OXO

Post by cavagnaro »

Even when Spanish is my natural language I will ask you to post in English. You see this is an English forum and by courtesy you should try to communicate with them and not force them to understand you.


Enviado de meu C6603 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
User avatar
enio.eltz
Senior Member
Posts: 1058
Joined: 28 Jul 2009 09:48
Location: Taquara - RS - Brazil

Re: CONFIGURACION DE PROTOCOLO R2 EN OXO

Post by enio.eltz »

Hi

If I could understand the Spanish text, you must upgrade your system to the latest release. Metering tickets with 24 hours plus is a known error.

Best regards.
Enio Eltz Filho
ACFE OXE R12
ACFE OXO C R3
Post Reply

Return to “Configuration”