CLIP pass through on external forward on OXE

[swinstu]

HI,

Does anyone know if it is possible to pass CLI of a caller via a user extension which is forwarded to an external number such as a mobile to show the CLI of the caller and the forwarded user extension.

I believe it is possible on an OXO within user - feature - CLI is diverted party but I have not been able to find any information if it is available on the OXE features or anywhere in the OXE software.

Thanks in advance.

[tot3nkopf]

It is only possible if the public operator allows "CLIP no screening" option.
In your TG NPD you need not to add DDI table for outgoing (-1).

Other option is to use "path replacement" (again if the public operator allows it) if you use same ISDN trunk for incoming and outgoing mgr-->Trunk Groups-->Call diversion in ISDN-->yes

[swinstu]

Its works perfectly fine on a basic rate service when using the Call diversion in ISDN set to Yes. Tested on a R8.0.1 system. Cheers and thanks for your assistance.

[miso]

And what about SIP trunk? Is it also possible to do it for SIP trk?

[tot3nkopf]

And what about SIP trunk? Is it also possible to do it for SIP trk?

I have no idea, never tested this. Gents, anyone?

[L_lefante]

And what about SIP trunk? Is it also possible to do it for SIP trk?

I have no idea, never tested this. Gents, anyone?

I am trying this but it is not working.

I have this scenario:

Incoming call (ISDN pri) --> forwarded set --> SIP trunk

when received the call in system (connected to OXE) through the SIP trunk, extension number of the forwarded set is displayed and not original caller id.
Is it clear? is it possible to pass through caller id from ISDN trunk to SIP trunk???