show Qos queue

[dpmp]

Hi guys,

I dont see any traffic inside the queues when I use the command:

show qos config


Wireshark shows me, that the DSCP Value is set.

Whats wrong with this command?

Does anybody know?

Best Regards and thanks in advance

Daniel

[silvio]

command works at 6250/6450 like wished.
At 6850E (but not 6850) you can activate it at one port at the same time:
6850E-Core> qos port 1/1 monitor


6850E-Core> show qos queue 1/1
Slot/ Q Bandwidth Packets
Port VPN No Pri Wt Min Max Xmit Drop Type
-----+----+--+---+--+-----+-----+---------+---------+----
1/1 0 0 0 - - - 437 35 PRI
1/1 0 1 1 - - - 0 2 PRI
1/1 0 2 2 - - - 0 0 PRI
1/1 0 3 3 - - - 813 23 PRI
1/1 0 4 4 - - - 0 0 PRI
1/1 0 5 5 - - - 0 0 PRI
1/1 0 6 6 - - - 2 0 PRI
1/1 0 7 7 - - - 22 0 PRI
Total Xmit Packets: 1274,
Total Drop Packets: 60


6850E-Core> qos port 1/4 monitor
ERROR: On Same Slot Other Port is already monitored

6850E-Core> show qos port monitor
NI Port
------+-------
1 1/1
2 -/-
3 -/-

Try the same with 6400 with release 6.4.4 or 6.4.5. I didn't know.

regards
Silvio