configuration from 4760-oxe5.1

[andi]

Thanks for your information.

I wanted to restart the CMISD service this night but then i got a call last evening from our Alcatel partner and he said that they found a solution and that i could work again with the 4760. On my question what they did or changed the said that they "restarted some serices on the server and changed some passwords", then I asked him if they restarted the CMISD and he just ask from where i knew that

Thanks again for your help here, I will check this forum now regulary, seems to be a very good source for technical Alcatel questions and talks.


Best regards
Andi

[cavagnaro]

Lol a slap to that support guy lol
check the posts here, you will see there is a lot of interesting and usefull information.
Welcome

[hans-juergen]

normaly you get this error if you have setup secure access on cmis.

see TC0734.

to reset the access in pbx
- put MAO off.
- Launch multitool SECURITY_ACCESS.
- Select option 10: Security access reinitialization.
- put back MAO on.

in 4760 uncheck the cmis secure access on the connection tab.

[rene1 vis]

dhs3init didn´t work.
Alcatel did the following, after that it works.

(1)xa000001> mao off

MAO was on -> MAO is off
(1)xa000001> multitool SECURITY_ACCESS

+------- [ Main Menu ] -------+

[ 0] - Exit
[ 1] - Consult Multilines And Supervised Sets
[ 2] + Consult Boss/Secretary
[ 3] - Consult Sets With Data keys
[ 4] - Consult Sets With Supervision Data keys
[ 5] + Consult Directory Number Supervision
[ 6] - Consult Supervision Keys On Attendant
[ 7] - Consult Attendant Assistant Key On Attendant Group
[ 8] - Consult Supervised Trunk Groups and Keys
[ 9] + Consult Supervised Trunks and Keys
[10] - Security Access Reinitialisation
[11] + Multiline Sets With Their Multiline Keys
[12] + Consult Secondary MLA Keys
[13] + Consult Voice Mail Supervision Keys

CHOICE ? 10

+------- [ Security Access Reinitialisation ] -------+

Security_Access_Reinit ACCESS STATION ...
Security_Access_Reinit ACCESS LIST ...
Security_Access_Reinit ACCESS USER ...

+------- [ Main Menu ] -------+

[ 0] - Exit
[ 1] - Consult Multilines And Supervised Sets
[ 2] + Consult Boss/Secretary
[ 3] - Consult Sets With Data keys
[ 4] - Consult Sets With Supervision Data keys
[ 5] + Consult Directory Number Supervision
[ 6] - Consult Supervision Keys On Attendant
[ 7] - Consult Attendant Assistant Key On Attendant Group
[ 8] - Consult Supervised Trunk Groups and Keys
[ 9] + Consult Supervised Trunks and Keys
[10] - Security Access Reinitialisation
[11] + Multiline Sets With Their Multiline Keys
[12] + Consult Secondary MLA Keys
[13] + Consult Voice Mail Supervision Keys

CHOICE ? 0
(1)xa000001> mao on

MAO was off -> MAO is on

[pankajchauhan]

Thanks lot.

This is the perfect solution for this issue.

Regards
Pankaj kumar