SNMPWALK showing very strange output

Post Reply
hghelani

SNMPWALK showing very strange output

Post by hghelani »

You will observe from below I have outlined 7 cases.

The tests were performed against a Live 6850 switch.

For each case I have documented my findings followed by a line of data taken when the show Mac-address-table CLI command IS EXECUTED

Followed by the output returned when an SNMPWALK is performed against the same switch and port number.

And as you can see I am getting some very strange data and am hoping some one can tell me why and how to fix it?


Case 1 The Mac address of the PC

64:31:50:34:6e:5f

Is clearly NOT the same Mac address returned by the SNMPWALK, which is

d1P4n_

VLAN 1 64:31:50:34:6e:5f learned --- bridging 1/5

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1005.1.100.49.80.52.110.95 = STRING: "d1P4n_"





Case 2 The Mac address of the PC

64:31:50:33:53:9f

Is clearly NOT the same Mac address returned by the SNMPWALK, which is

d1P3Sƒ

VLAN 228 64:31:50:33:53:9f learned --- bridging 1/7

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1007.228.100.49.80.51.83.159 = STRING: "d1P3Sƒ"




Case 3 The Mac address of the PC

3c:4a:92:c3:d2:44

Is clearly NOT the same Mac address returned by the SNMPWALK, which is

<JÆ+ÊD

VLAN 195 3c:4a:92:c3:d2:44 learned --- bridging 1/8

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1008.195.60.74.146.195.210.68 = STRING: "<JÆ+ÊD"




Case 4 NO ANNOMOLIES FOUND, AS BOTH SETS OF DATA SHOW THE SAME MAC ADDRESS


VLAN 216 00:18:fe:26:8e:70 learned --- bridging 1/11

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1011.216.0.24.254.38.142.112 = Hex-STRING: 00 18 FE 26 8E 70





Case 5 NO ANNOMOLIES FOUND, AS BOTH SETS OF DATA SHOW THE SAME MAC ADDRESS


VLAN 228 00:1c:c4:ae:b8:51 learned --- bridging 1/12

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1012.228.0.28.196.174.184.81 = Hex-STRING: 00 1C C4 AE B8 51




Case 6 NO ANNOMOLIES FOUND, AS BOTH SETS OF DATA SHOW THE SAME MAC ADDRESS


VLAN 228 00:17:a4:1c:7f:a1 learned --- bridging 1/13

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1013.228.0.23.164.28.127.161 = Hex-STRING: 00 17 A4 1C 7F A1




Case 7 NO ANNOMOLIES FOUND, AS BOTH SETS OF DATA SHOW THE SAME MAC ADDRESS


VLAN 216 00:19:99:7e:c6:b0 learned --- bridging 1/14

C:\>snmpwalk -v 2c -c PW SWITH-IP
SNMPv2-SMI::enterprises.6486.800.1.2.1.8.1.1.1.1.1.1014.216.0.25.153.126.198.176 = Hex-STRING: 00 19 99 7E C6 B0


CAN SOME ONE PLEASE HELP ME
one6f

Re: SNMPWALK showing very strange output

Post by one6f »

Hi,
it should be Hex-STRING and not STRING !
Please try also with snmpwalk this oid: .1.3.6.1.2.1.17.4.3.1.1
Try to use another manager(not Windows).
Try capture with wireshark and look in snmp response packets.
What sw you running (with 6.4.3.779 and 6.3.4.601 we have no such issue).
Post Reply

Return to “OmniSwitch 6850 / 6850E”