VRRP Config

[nramesh351]

Hi Friend,

is it possible to configure Vrrp in Omni 6850 series. please share me configuration...

Regards,
Ramesh.N

[dathan]

Hi Ramesh,

Yes, its possible...Please find the configuration below. I have created a L2 and L3 Vlan with IP 192.168.10.1. The VIP that i have given is 192.168.10.3

Test-Switch-> vrrp 1 10
Test-Switch-> vrrp 1 10 address 192.168.10.3
Test-Switch-> vrrp 1 10 enable
Test-Switch->
THU MAY 19 09:19:04 : VRRP (77) info message:
+++ Virtual router VRID=1 VLAN=10 enabled

Test-Switch->
Test-Switch->
Test-Switch-> SHOW VRRP
VRRP default advertisement interval: 1 second
VRRP default priority: 100
VRRP default preempt: Yes
VRRP trap generation: Enabled
VRRP startup delay: 45 (expired)

IP Admin Adv.
VRID VLAN Address(es) Status Priority Preempt Interval
----+----+---------------+--------+--------+-------+--------
1 10 192.168.10.3 Enabled 100 Yes 1

Test-Switch->

Please let me know if you have any issues..

Thanks and Regards
Surya

[jlettinck]

Hi,

VRRP is possible on the OS6850. Please see attachment for a simple example config. Also check the network configuration manual. It has some extensive examples and explanations.


Best regards,
Jeroen