Error msg on Lola

[alliance]

Hi,

The hard disk in my CPUe-1 has crashed and after changing the Hard disk the CPU does not startup again.
I'm trying to do a Lola but I'm getting an error msg(missing/boot/config.rc) on Lola

I'm using Lola300/10.1 and R410/041 packages.

Can some help

thanks

[SGE]

Hi, please check:
- Firewall out
- Network release (donwload files) must be at WINXP
- DIP 3 on CPU is ok?
good luck

[Friday]

I'm trying to do a Lola but I'm getting an error msg(missing/boot/config.rc) on Lola

A couple of tricks that may help:
- Example: OXO has IP-adr. 192.168.92.246, make sure your PC has 192.168.92.245
- Disable the wireless network card on your PC. Only the network card used by Lola should be activated.

Good luck and keep us updated

[H-MAN]

This should work:
Turn on Simple File Sharing:
1. Start your Exploere
2. On the Tools menu, click Folder Options.
3. Click the View tab, and then select the Use Simple File Sharing (Recommended) check box to turn on Simple File Sharing. (Clear this check box to turn off this feature.)

Share the folder with the firmware in it:
1. Right-click the folder, and then click Sharing and Security
2. Click to select the Share this folder on the network check box, and then click OK.
3. Network Share Permissions:
• Everyone: Full Control

[OXO-Man]

Hello,
don´t forget to configurate the IP-Adress of your PC in the regedit:

HKEY_CURRENT_USER\Software\PCXTools\LoLa300_R10.1\LoLa\Config

ipAdress: <IP>
CoCPU_IP: <your> (example: 192.168.92.100PC -> 192.168.92.102 CoCPU)

Please check that your PC has only ONE Address. It has to be in the range of the default-ip of the OXO (192.168.92.xxx)

The firmware has to saved in the root of your harddisk cause lola get the firmware by network sharing and can´t connect on the private folder of the user.

Hope this helps....!

Good luck!
OXO-Man