configuration from 4760-oxe5.1

stekmtiki · Post by **stekmtiki** » 11 Jul 2005 08:53

hi
i have a 5.1 system installed and installed with 4760. it used to work properly for quite sometime but now it developed a problem.

when i try to connect PCX from configuration window, it gives CMISE error. the log is as follows:
[12:35:15 PM] > uid=AdminNmc,ou=Administrators,ou=Administration,o=meridien,o=directoryRoot is connected to server OMNIVISTA:389.
[12:35:15 PM] >
[12:35:19 PM] > 1 new nodes displayed.
[12:35:20 PM] > 1 new nodes displayed.
[12:35:21 PM] > 1 new nodes displayed.
[12:35:25 PM] > Connection : Wait For Connection
[12:35:25 PM] > Connection : Checking Connection
[12:35:25 PM] > Connection : Connection Established
[12:35:25 PM] > Check Version PCX xa000000
[12:35:26 PM] > Connected to PCX. xa000000
[12:35:27 PM] > Load the local object model
[12:35:34 PM] > Request 0 sent to xa000000.
[12:35:35 PM] > Request 0 completed on xa000000: 0 instance(s) received.
[12:35:35 PM] > Full PCX object model is available.
[12:35:35 PM] > CMISE reject: Authentication Failure
[12:35:36 PM] > Disconnect from PCX. xa000000

please let me know what could be the problem?

thanking you for your replies,
stekmtiki

stekmtiki · Post by **stekmtiki** » 11 Jul 2005 08:57

everthing else is working fine!!!!!!!!!!!

la_toupie · Post by **la_toupie** » 12 Jul 2005 14:05

Hi,

It seems that it's the login/passwd ftp or the parameter 47XX in installation of your PBX.

Post by **frank** » 13 Jul 2005 12:57

Authentication failure.. I would go for the login password.

By the way, I changed all password (customer request) on a site, and just so you know, STAND BY CPU does NOT upgrade the password ! It's tricky in case of a bascul !

chris · Post by **chris** » 14 Jul 2005 04:44

Just an added note to Frank's one changing the pw's on the node must be donon all of the cs's that exist csa, csb, and voicemail.

la_toupie · Post by **la_toupie** » 15 Jul 2005 10:11

Yes, it 's really long to change all these passwd overall with double CPU. Is there a command to change all the passwrod in the same time ?

RuSt · Post by **RuSt** » 26 Jul 2005 14:08

I have had this problem several times.
It seems that the cmisd prosess hangs.

You can eigther shutdown the system or just restart the CMISD prosess.

Here are the command. dhs3_init -R CMISD

Good luck!

andi · Post by **andi** » 09 Jan 2007 02:41

Hello guys

Sorry for warming up this old topic but I currently have the same problem like stekmtiki mentioned in the first post.

Our local Alcatel support isnt able to solve the problem sine 2 weeks now. I am also not an Alcatel expert so I wanted to ask what will happen if i restart the CMISD at my own. Is CMISD only used between the 4760 and the callservers or does the phones also use CMISD?

Thanks for you help,
Andi

Post by **cavagnaro** » 09 Jan 2007 07:48

I don't think phones uses CMISD at all, you can do the reset on after work hours if you concern about stability.
That would just reset a internal process and put it working again on few seconds.
I'll recommend to search for releases notes of your version to see if any patch fix this issue.

Post by **vad** » 09 Jan 2007 22:42

From my practice - was no problem with using dhs3_init -R CMISD command. No problem with running telephone application.

Alcatel Unleashed

configuration from 4760-oxe5.1

configuration from 4760-oxe5.1

passwords