4070IA Problem

benacke · Post by **benacke** » 04 Oct 2010 17:50

Hi,
i have a 4200E with DECM4 and R4.2, i plugged in the dect basestation and the led flashes 1s on .. 1s off.. the docs says, thats a problem after selftest. If i look into the HW-Anomaly-Table in the pcmmc, there is a "DECT Basestation Anomaly" error. what's wrong? The orange led on the DECT4 board flashes 2.5s on .. 0.5s off.

Thank you in advance.
Ben

troppo65 · Post by **troppo65** » 05 Oct 2010 03:14

In the history table when you highlight the Anomoly in the window above there will be an "Event" followed by a number and "Complimentary Info" followed by 4 Bytes of info in Hex, these will tell you what the issue is in the tech manual.

If you don't have manuals, post the details and someone will look them up for you.

benacke · Post by **benacke** » 05 Oct 2010 10:47

There are a lot of this events with different complementary info.

06 03 FF FF
02 FF FF FF
09 00 FF FF

troppo65 · Post by **troppo65** » 06 Oct 2010 04:42

Need the event numbers to go with the complementary info.

The event number gives a general reason, and the complementary info further defines the event.

benacke · Post by **benacke** » 06 Oct 2010 15:02

event number is 135