Configuration problem

Post by **vad** » 13 Apr 2010 22:16

Check Hardware and limits/ Main cabinet

DFK · Post by **DFK** » 14 Apr 2010 08:43

Hi Vad, it is CPIV and purchased a promo offer of OXO..Does CPIV by default contains VoIP card?

Post by **vad** » 14 Apr 2010 22:41

CPIV ? May be CPU-4? Quetion was not about main CPU (question was - you have one CPU or two, and have you VoIP board or not) - can you show main cabinet window?
About VoIP - Hardware and limits/ Main cabinet, right click on CPU board/ details

elkiwi · Post by **elkiwi** » 16 Apr 2010 19:48

Hardware and Limits --> Main Cabinet. There's a list of boards installed on the OXO

Sorry I didn' see page 2!!

DFK · Post by **DFK** » 27 Apr 2010 08:41

Hi all, Sorry for the delay reply.....This OXO doesn`t have any VoIP board with it..according to Alcatel representative we dont need VoIP board for Basic Pimphony as Promo offers contains 10 basic Pimphony license, is it correct? i dont need VoIP board for basic pimphony client??
If it is Ok then what IP should i insert while configuring PimPhony?
Thanks

elkiwi · Post by **elkiwi** » 27 Apr 2010 11:24

In that case CPU IP

ileana · Post by **ileana** » 28 Apr 2010 10:03

Hello DFK, well.. If you want to check your boards in the OXO, try to login in OMC with the IP of CPUboard an the password that you´ve configured. Then in Hardware&limits/ Main Cabinet you con check the boards of the system and daughter boards.

If you need to know the IP address of each board (CPU or CoCPU) follow this route: Hardware&limits/LAN-IP Configuration/Boards.

maverick · Post by **maverick** » 04 May 2010 13:04

Hello
ok, if you check the hardware, licenses, and all its correct. the problem maybe its in your PC, disable firewall in your PC, disble antivirus, or check firewall in the LAN. I had problems with this issues in diferente OS plataforms.
regards.