Memory Utilization on average?

[tysonj]

I have noticed over the past few weeks that one of my 6850-U24Xs has been using more and more Memory. Currently it is sitting at 76%. I am hoping someone can tell me if this is typical utilization, or if I should be looking for a network or switch issue. It hasn't caused any issues at this point, nor has it tripped the 80% default threshold. I just want to get ahead of any potential problems as the device is near the network core.

I appreciate any and all input.

Thanks,

[cedric1]

hello

here a output with no pb

OMN161=> show health
* - current value exceeds threshold

Device 1 Min 1 Hr 1 Hr
Resources Limit Curr Avg Avg Max
-----------------+-------+------+------+-----+----
Receive 80 01 01 01 01
Transmit/Receive 80 01 01 01 01
Memory 80 70 70 70 70
Cpu 80 15 14 12 23

OMN161=> show system
System:
Description: 6.3.1.1023.R01 Service Release, October 16, 2008.,
Object ID: 1.3.6.1.4.1.6486.800.1.1.2.1.7.1.10,
Up Time: 165 days 1 hours 24 minutes and 38 seconds,
Contact: Alcatel-Lucent, http://alcatel-lucent.com/wps/portal/enterprise,
Name: OMN161,
Location: T-Tbis-Techlocal,
Services: 72,
Date & Time: MON DEC 14 2009 16:54:25 (CET)

Flash Space:
Primary CMM:
Available (bytes): 12104704,
Comments : None

OMN161=>

[tysonj]

Thanks Cedric1.
I didn't have another Unit to compare statistics with available at this location. Looks like I am going to be ok with this one.

[cedric1]

hello

in general all 6850 have memory use around 80%. But it is not a issue.

Regards

Cedric