Installation of Rel 5.1.2LX

[sandy_shy2006_DUP]

Hi

I have a system with Rel 5.1.2Lx....which went down last week due to harddisk problem...for the time being i managed to make the system up on temporary rel 7.1 with open licenses

Now i am working on the original setup. I have gone through the technical documentation for rel 5.1.2...but i cannot see any step but step procedure to install the same.

Can someone has the detail procedure to install the Rel 5.1.2 ans its an old release and i am not familiar with that.

Thanks

Regards

Sandeep

[Gedeon]

It's the same method that R7.1 or higher.
Use PC Installer (it's possible that the recent version of PC installer not working fine with this older relase, in this case, you have PC installer in PCMAO directory of 5.1 release.
Install software on the hard disk, restore database and linux data from you 5.1 backup (not the actual configuration).
Check OPS after (same CPU, no problem normally) and status of boards, GD, and sets.

G.

[sandy_shy2006_DUP]

Hi Gedeon

Thanks for the feedback

actually it was the issue with the harddisk..i was using 80 GB Harddisk....but i think old release could not partitioned the harddisk...hence when i tried with the 20 GB it worked fine...

Thanks

Sandeep