OXE Reboot Loop

[talkhalidi]

lool , my friend i will do this , but how to Convince my manager the hard disk is fulty , omg anyway it seems there is no other way.

thanks alot , wish me good luck

[talkhalidi]

am searching in the market for Compatible HDD 60 hitahci.

just man , are you sure the problem is HDD and if i replace it it will be fine?

lol i dont want to replace it and not working again otherwise he will blame me.

[cavagnaro]

lool , my friend i will do this , but how to Convince my manager the hard disk is fulty , omg anyway it seems there is no other way.

thanks alot , wish me good luck

come on a HD costs what? $80? Will not leave to bankrupt...
How to convince? Sit him next to you and show him that what ever you do it never works fine.

[krzysioD]

Huh,

always first try to use good hardware, than blame soft...
not a very superb boss you got...

[config]

1. CS mode Lola with slot 0
2. upload full SW to CS
3. power off CS
4. CS mode 0x001
5. upload full SW to CS
6. say log console

-----------------------------------
CPU at 133 mhz
check lock RTC
value of DIL switch 1


YOU CAN strike Ctrl B to enter in BIOS monitor during several seconds from NOW !

Dynamic Boot from No Boot Device selected
Dynamic Boot from No Boot Device selected
Dynamic boot is disabledÛ›Alize BIOS Monitor
-----------------------------------

it's Ok

[talkhalidi]

i have replaced the HDD as suggested, uploaded the software again successfully, and the still the same. upon reboot it will not boot from hard disk it will go to bois light menu.


how i can restore the BOIS to defualt again?

[Rens_DUP]

Hello talkhalidi,

Did you solve your issue? I'm currently haveing the same problem after an upgrade from release g1503.19c to g150323b.

When I put the hdd on another CS the system works fine so I know the HDD is working.

Regards,

Rens

[talkhalidi]

No my freind, i thought replacing the HDD will solve it, it seems eaither the BOIS issue or the CS board fualty.

does any one how to customise the BIOS or restore the BOIS defualt settings?

[talkhalidi]

currently this is what i have


Welcome to oxe1
Alcatel-Lucent OmniPCX Enterprise

login: mtcl
Password:
Last login: Thu Apr 2 14:35:27 from 192.168.254.101

Alcatel-Lucent OmniPCX Enterprise
standard installation last performed: 31-Mar-2009 15:17:54



# The role of the CPU is MAIN
Application software identity

R8.0.1-g1.503-17-d--c80s1

Business identification: R8.0.1

Release:
DELIVERY g1.503
Patch identification: 17
Dynamic patch identification: d

Country:
Cpu: c80s1

ACD VERSION
release : 8
bug_fixing : 1
protocol_id : 90
version_dy_hr_stat : 11

(1)oxe1


after shutdown -r now , it will boot then go to bois light monitor or reboot loop. and even if you should somtimes to load from HD0 somtimes it does not work.

[Rens_DUP]

Strange, very strange, I guess I'll have to raise a question with Alcatel,

I'll keep you informed.

Regards,

Rens