MIPT without SVP Server

[nowi_DUP]

Hi,

we are trying to get WLAN sets running without SVP server. We have a OAW4324 with WMM enabled. License is installed.

The sets get an IP address and also download the firmware and the lannpbx-mipt.cfg file.
When I add the MAC to the user I can see the phone number of the set on the MIPT display but as soon as I try to establish a call (e.g. dial 0 for external) I get a "Service Unavailable" and the phone reboots.

When I remove the MAC from the user config I get the "Service unavailable" immediately.

Any idea? I double-checked the lanpbx-mipt.cfg file. Did an autobuild...no success so far.

Regards,
Nowi

[transalp]

Hello,

If the phone reboots ,
you should try the following,
in the oxe go to mgr, users, tsc ip user (of your mipt user), there you uncheck reset for update authorised (set it on + NO),

[DnlWild_DUP]

Hello,

I got a problem like that. On the OAW, the license is required, but your configuration is need to do too. You have configured the OAW for Qos on the SSID that Mipts are connected?

On the OxE, configure a domain, in the IP settings. The domain must represent the ip-range of the Mipts. After that, configure a IP Quality of Service Class, with these parameters:

UDP Lost : 30
UDP Lost Reinit : 15
UDP Keep Alive : 15

On the R8.0 manual, in the page IP-PCX networks, have a page that explain what you need to configure, in OxE and OAW, step by step.

Good Luck!

Bye