Call waiting in oxe

[thusharakelum]

Hi guys,

We are using oxe 8.0 system.I need to adjust call waiting timer .That mean we are using 4029 digital phone.When one of user is using that 4029 digital phone.During the conversation another user try to call that user.He can see only one time appearing his number and bip sound.I want to adjust that timer by 10s after 10s like that.Both (bip & display number)
It is possible.

ksamra

[vad]

There are specific timers for Alcatel-Lucent 8 and 9 series sets:

Timer no. 325: display of audio and internal application confirmation:

This popup is displayed in the following cases:

Activation/deactivation of an internal application (forward, mail, appointment, redial, dial by name, programming, etc.)

Activation of audio modification (headset (except when starting or answering a call), hands free (except when starting or answering a call), group listening, mute)

Timer no. 331: display of the popup window indicating an incoming call

Timer no. 332: display of the confirmation popup

Timers No.356 (default value 20 seconds) and No. 357 (default value 60 seconds): Used by the Input Method Editor (IME) for input of non-Latin characters in Dial by name. Both timers close the IME due to no user activity. When Timer No. 356 expires, the previous input is saved. When Timer No. 357 expires, the previous input is cleared. The value of Timer No. 356 should be less than the value of Timer No. 357.

As I understand you ask about timer 331

[vad]

About tone - check tones 23, 60 and 67.
Because used tone depends of management (protection against multi-line ringing yes/no, ringing tone in hanset yes/no).

[thusharakelum]

Dear all,

Thank you for your replies.But waiting tone is still pending.I tried to manage it through that tones.But it is not working.Thing is now I want to adjust that call waiting beep.It comes only one time.I need it 10 second by 10 second display with that calling number.

Thanks,

[thusharakelum]

hello pls help me to solve that issue.

Thnks
Kmars

[swinstation]

Hi
I did it and it was successful.


1.go to system and select tone 60.
edit tone 60 to:
1.tone 25 duration 20 sec
2.tone 0 duration 10 sec
3.tone 25 duration 20 sec
4.tone 0 duration 10 sec
5.tone 25 duration 20 sec
6.tone 0 duration 10 sec
or every duration that you want then:
go to timer 88 and change it what you want this timer play tone 60 according your configuration.now if you want play sound every 10sec edit tone 60 what you want
regards.

[dinusha]

thank you alll

[compean]

this solution apply to the release R10.1?

[cavagnaro]

Should be

Sent from my XPeria Z