No SCSI support with OXE R8.0.1 in VM

Post Reply
trex1

No SCSI support with OXE R8.0.1 in VM

Post by trex1 »

Hi Guys,

Im usinge the OXE in my lab in a VM environment which supports only SCSI disks. After an upgrade to R8.0.1 and switch to the unactive partion my system doesnt boot anymore.

After some research I found out, that the SCSI support seems to be gone in the Linux version of R8.0.1. If you set up a OXE from scratch (as "Bladeserver" in the PC installer) no harddisk will be found.
R8.0 - g1.302 linux 53.0 --> SCSI OK
R8.0.1 - g1.503 linux 55.0 --> SCSI NOK
R9.0 - h1.301 linux 62.0 --> SCSI OK
In 8.0 and 9.0 there is no problem. If I use a g1.503 version with Linux 53.0 there is also no problem, but this is not the correct Linux for R8.0.1.

Does anybody have an idea how to solve that or has experienced the same? ;-)

Thanks & Greetings,
T-Rex
berty_DUP

Re: No SCSI support with OXE R8.0.1 in VM

Post by berty_DUP »

Why not set them up as IDE disks in VM?
trex1

Re: No SCSI support with OXE R8.0.1 in VM

Post by trex1 »

Because my VM does not have the ability to create IDE disks. Unforetunately. :(
berty_DUP

Re: No SCSI support with OXE R8.0.1 in VM

Post by berty_DUP »

Bummer!
cavagnaro

Re: No SCSI support with OXE R8.0.1 in VM

Post by cavagnaro »

:shock: What VMWare is that??? Bad cracked or what???? Ask VMWare support for why you can't...if you have support of course.
kleva

Re: No SCSI support with OXE R8.0.1 in VM

Post by kleva »

I agree with cavagnaro.

Something is wrong with the VMWare installation. Even free version of VMWare Server has IDE support.
http://www.vmware.com/download/

Unless we both missed the boat and you are not using VMWare, if so then download and try on that.

PS: Just noticed that ESXi version of VMWare is now also Free - YEAH!
kike

Re: No SCSI support with OXE R8.0.1 in VM

Post by kike »

Hi.
There is information in this link:

http://theether.net/kb/100038

It's about problems with some kernel versions and LSI SCSI adapters in VMware. OXE 8.0.1 uses kernel 2.4.17, those issues should not affect your VM, but you can try with Bus Logic adapter in your Virtual Machine.
I had problems with Bus Logic SCSI adapters ... but in the free VMware Server, not in ESX.
cavagnaro

Re: No SCSI support with OXE R8.0.1 in VM

Post by cavagnaro »

But why use SCSI on a VMWare for an OXE????
krzysioD

Re: No SCSI support with OXE R8.0.1 in VM

Post by krzysioD »

Becaouse this VMWARE version of trex1 can't simulate IDE drive :\

I think that he has paid many $$$ for "ESX" super-server vmware mode, and plain IDE drive is not supported :(
best solution: download the vmware server -> it's free and works good.
cavagnaro

Re: No SCSI support with OXE R8.0.1 in VM

Post by cavagnaro »

:lol: :lol: super product that can do basic configurations...
Post Reply

Return to “Other”