CLI Issue in AA(Please Help..)

[waqasrehman_DUP]

Dear All
Hiii
I have a problem in AA please help me

thnx in advanced

I have AA in analog lines with 2 voice mail ports, the problem is CLI appears on IP and digital sets but on analog sets CLI is not shown,i-e only shows the voice mail ports number.
Is it possible to have CLI on analog sets with AA.

thnx
Waqas

[vad]

PBX send CLI during ring (or answer), at this moment this is VM port number, after transfer I think PBX will not send real calling CLI and set will not receive this CLI too.
You can check - call from set A set B, from set B dial set C (on set C you will have CLI B), answer, and from set B make transfer. I think on set C you will have all time CLI of set B.

[waqasrehman_DUP]

thnx vad
i have already done this Set C shows VM port number.

Any other ideas

much much thnx
Waqas

[waqasrehman_DUP]

Hi

M waiting for any more ideas please do let me know.


thnx
Waqas

[tot3nkopf]

Try this:

In Sytem misc--->Feature Design--->Part2-->CLI is diverted party if external caller (default unchecked-->check it)

Regards.

[waqasrehman_DUP]

Thnx br.

(Sytem misc--->Feature Design--->Part2-->CLI is diverted party if external caller) is checked.
bt the problem remaims the same.

Please do let me know if Is it possible to have CLI on analog sets with AA.


thnx
Waqas

[torrentula]

You have the analog extension terminal type set as Classiq(class) instead of ZSet(normal)?

What if you route the call directly to the analog extension and bypass the AA to test, do you get CLI then?

[waqasrehman_DUP]

Thnx

1)Yes i the analog extension terminal type set is ZSetClass

2)If i route the call directly to the analog extension and bypass the AA CLI is displayed.But with AA enabled i just see the Voice mail port number.

thnx again

[torrentula]

Thnx

1)Yes i the analog extension terminal type set is ZSetClass

2)If i route the call directly to the analog extension and bypass the AA CLI is displayed.But with AA enabled i just see the Voice mail port number.

thnx again

Sorry, we have breached my level of OXO knowledge. I am interested in the answer too...

We did isolate it to being the AA causing the problem though