How I find the IP adress of someone who reset a coupler?

MAM · Post by **MAM** » 14 Nov 2005 14:30

In a OXE common HW f2.502.7 (with redundancy) I found this incidents:

12/11/05 10:06:16 000070M|--/--/-/---|=2:2166=CPU requires Reset CPL IO1 (0,28) Cause 0
In incinfo "Cause 0" explanation say "reset request by rstcpl command"
Them this incident
12/11/05 10:06:16 000070M|--/--/-/---|=1:2077=CPU was halted due to a shutdown
And them the CPU switchover.

I need to know who perform the rstcpl command if not a logical explanation

Thanks!

MAM

stekmtiki · Post by **stekmtiki** » 15 Nov 2005 10:42

i doubt it is possible.
try maohist, but it doesnot give the ip address of the pc loggedin.

else,
change password so that no one except you can have access!

use passwd command for this.

Post by **frank** » 15 Nov 2005 14:54

I still don t have a lab under hand, but try under root the command last maybe ?

MAM · Post by **MAM** » 16 Nov 2005 08:24

"last" work fine!!!

Thank you!

Marcelo