Outbound timers

[cavagnaro]

Hi guys,

I'm checking all my Outbound installations due to a problem i'm having on a customer.
I need better explanation or examples on how this timers work:

For VAD
314
315

For No Answer Detection Time:
267
268

I have read all documents available an can't understand them. Maybe if somebody has a diagram or flow where this timers apply will be great.

Thanks a lot

[knightr1der]

267
T_WAIT_DTO_UNI
Max wait during the activation of the DTO_Universal

268
T_WAIT_DTO_VAD
Max wait during the activation of the DTO_VAD

OK, this is an outbound solution, correct?
What exactly is the problem on the sys?
I have an outbound trouble shooting doc that might help. come back to me. MSN if you can

[finaluser]

I use the following timers

For VAD
314 = (6 to 12) "Alo"
315 = (2 to 5) "silence" after Alo

For No Answer Detection Time:
267 = 100 (10 seconds to detect busy tone)
268 = 350 (35 seconds "about 9 rings" to detect voice activity and ring back tone to mark the call as not answer)

[cavagnaro]

How is your dB configured on the GPA/GPA2 board?
-33? -32?

Thanks