Problem with hybrid mode

[fripouille]

Hello,

I am having a problem with the hybrid ports on the 6360-P24X switch.
I am using port 25 and 26 in “fiber” mode, but every time I restart, I have to switch it back to copper mode and then to fiber mode so that the fiber link can work properly again (interfaces 1/1/25 hybrid-mode copper, interfaces 1/1/25 hybrid-mode fiber).

Without doing this, the CLI gives me this information:
+++ Link 1/1/25 Alias Aggregat Vers Coeur RGI operationally up
+++ Link 1/1/25 Alias Aggregat Vers Coeur RGI operationally down
+++ Link 1/1/25 Alias Aggregat Vers Coeur RGI operationally up
+++ Link 1/1/25 Alias Aggregat Vers Coeur RGI operationally down
+++ Link 1/1/26 Alias Aggregat Vers Coeur Administration operationally up
+++ Link 1/1/26 Alias Aggregat Vers Coeur Administration operationally down
+++ Link 1/1/26 Alias Aggregat Vers Coeur Administration operationally up
+++ Link 1/1/26 Alias Aggregat Vers Coeur Administration operationally down

I use several switches of the same model, and this is the only one with which I have this problem.

All my switches are running version 8.10.86.R04.

Does anyone have a solution?

Thank's a lot.

Laetitia.