It's been a long battle, but we moved again our server to another cloud service, protecting ourselves from (sadly) Chinese IP Addresses, which would bring down AlcatelUnleashed. Hopefully, this is now under control. Feel free to contact us through the CONTACT US link at the bottom of this page if you have any question. Happy browsing!

Server Syslog

Post Reply
fluciano
Member
Posts: 7
Joined: 25 Sep 2023 18:52

Server Syslog

Post by fluciano »

Good morning everyone,
I am setting up a Syslog server and am currently using the following commands. As I understand it, these commands only allow you to specify a Syslog server IP address.

swlog output socket x.x.x.x remote command-log
swlog remote command-log enable
swlog console level info
command-log enable

However, now I need to configure it to use a Syslog server that has a domain name instead of an IP.

I need to configure the following:
swlog output socket server.syslog.com remote command-log
swlog remote command-log enable
swlog console level info
command-log enable

How can I make this configuration?

This is the data of my switch
OS6350-P24 6.7.2.113.R05 GA
Top
Post Reply

Return to “OmniSwitch 6350”