Virtual chassis speed OS6900-X48C6

[mod]

Hello,

I'm running 2 switchs OS6900-X48C6 as a virtual chassis with 2 fibers link and QSFP28-LR4-100G modules.

How can I test speed throughput between chassis ? Is this possible from AOS CLI ?

-> show virtual-chassis vf-link
VFLink mode: Static

Primary Config Active Def Speed
Chassis/VFLink ID Oper Port Port Port Vlan Type
-------------------+----------+---------+-------+-------+---------+-----------
1/0 Up 1/1/51A 2 2 1 100G
2/0 Up 2/1/51A 2 2 1 100G


-> show virtual-chassis vf-link member-port
VFLink mode: Static

Chassis/VFLink ID Chassis/Slot/Port Oper Is Primary
-------------------+------------------+----------+-------------
1/0 1/1/51A Up Yes
1/0 1/1/54A Up No
2/0 2/1/51A Up Yes
2/0 2/1/54A Up No


Thanks in advance,
Regards

[Cristek]

I haven't seen a way to accomplish what you are asking. But personally, once I see 100G on both VFL ports, I'm happy it works as intended.