Trunk group name without callerid (in/out-going calls)

[cwdlcs]

Hello!

I’m newbie to omniPCX and voip at all.
But:
We are using Alcatel omniPCX enterprise (R9.1-i1.605-21, c80s1) as a telephone station (numbers 44**) and analog telephone station (numbers 45**).

We’ve made trunk (t2) between stations.
All working well (44->44, 45->45), but we have 2 troubles while calling between:

1. When calling to 44 (from 45), on telephones we see trunk group name rather than caller-id from 45 (for example calling to 4401 from 4510 we see “trunk to analog station”).

2. When calling to 45 (from 44), when numbering 2 first digits (45) we see trunk group name, but after pressing last 2 digits (10), tgn disappear, and we se only last 2 entered digits.

Expected behavior:

1. When calling to 44 from 45, we want to see full caller id (4510), or at least, last digits (10).

2. When calling to 45 from 44, we want to see full called-id (4510), or at least last called number digits.

How can we achieve this, using cli (telnet) of omniPCX?
Thanks a lot.

[ahqswitchroom4466]

E1 or SIP trunk?

[cwdlcs]

E1 or SIP trunk?

Hi, E1, sip unsupported on analog.

[haroun]

Hello!

I’m newbie to omniPCX and voip at all.
But:
We are using Alcatel omniPCX enterprise (R9.1-i1.605-21, c80s1) as a telephone station (numbers 44**) and analog telephone station (numbers 45**).

We’ve made trunk (t2) between stations.----------> [font=][font=]that means for me you have two omniPCX enterprise 1st one with plan number 44xx and second one with 45xx as PN , the two pabx are liked with E1 right?

All working well (44->44, 45->45), but we have 2 troubles while calling between:


1. When calling to 44 (from 45), on telephones we see trunk group name rather than caller-id from 45 (for example calling to 4401 from 4510 we see “trunk to analog station”).[font=] ->>>>>>callback translator managed
2. When calling to 45 (from 44), when numbering 2 first digits (45) we see trunk group name, but after pressing last 2 digits (10), tgn disappear, and we se only last 2 entered digits.->>>>>> how do you make the call ? using ARS ? tkgp Prefix cease w/wo overlapping ? network number ...?

Expected behavior:

1. When calling to 44 from 45, we want to see full caller id (4510), or at least, last digits (10).

2. When calling to 45 from 44, we want to see full called-id (4510), or at least last called number digits.

How can we achieve this, using cli (telnet) of omniPCX?
Thanks a lot.