OS9800 - problem with static-route / default route

[aschuler]

Hi,

today I changed on a running OS9800 the default route but now this route is not activated as I can see in the router database.

SLFCO3-> show ip interface
Total 6 interfaces
Name IP Address Subnet Mask Status Forward Device
--------------------------------+---------------+---------------+------+-------+----------------------------------------------------
EMP 192.168.90.7 255.255.255.0 DOWN NO EMP
Loopback 127.0.0.1 255.0.0.0 UP NO Loopback
VLAN1008 10.14.8.6 255.255.255.0 UP YES vlan 1008
dhcp-client 0.0.0.0 0.0.0.0 DOWN NO vlan 1
vlan-172 172.23.51.3 255.255.255.0 UP YES vlan 172
vlan-60 149.204.60.61 255.255.255.0 UP YES vlan 60

SLFCO3-> show ip router database
Legend: + indicates routes in-use
* indicates BFD-enabled static route
r indicates recursive static route, with following address in brackets

Total IPRM IPv4 routes: 4

Destination Gateway Interface Protocol Metric Tag Misc-Info
---------------------+---------------+--------------------------------+--------+-------+----------+-----------------
+ 10.14.8.0/24 10.14.8.6 VLAN1008 LOCAL 1 0
+ 127.0.0.1/32 127.0.0.1 Loopback LOCAL 1 0
+ 149.204.60.0/24 149.204.60.61 vlan-60 LOCAL 1 0
+ 172.23.51.0/24 172.23.51.3 vlan-172 LOCAL 1 0


Inactive Static Routes
Destination Gateway Metric
--------------------+-----------------+---------
149.204.228.128/25 149.204.228.64 1
149.204.4.3/32 192.109.76.20 1
192.108.37.121/32 192.109.76.20 1
149.204.168.0/26 149.204.66.251 1
0.0.0.0/0 10.14.8.1 1


SLFCO3-> show ip route

+ = Equal cost multipath routes
* = BFD Enabled static route
Total 4 routes

Dest Address Subnet Mask Gateway Addr Age Protocol
------------------+-----------------+-----------------+---------+-----------
10.14.8.0 255.255.255.0 10.14.8.6 00:17:55 LOCAL
127.0.0.1 255.255.255.255 127.0.0.1 1075d23h LOCAL
149.204.60.0 255.255.255.0 149.204.60.61 845d19h LOCAL
172.23.51.0 255.255.255.0 172.23.51.3 1075d23h LOCAL

SLFCO3-> ping 10.14.8.1
PING 10.14.8.1: 56 data bytes
64 bytes from 10.14.8.1: icmp_seq=0. time=160. ms
64 bytes from 10.14.8.1: icmp_seq=1. time=0. ms
64 bytes from 10.14.8.1: icmp_seq=2. time=1. ms
64 bytes from 10.14.8.1: icmp_seq=3. time=4. ms
64 bytes from 10.14.8.1: icmp_seq=4. time=1. ms
64 bytes from 10.14.8.1: icmp_seq=5. time=1. ms
----10.14.8.1 PING Statistics----
6 packets transmitted, 6 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/27/160


Any idea / suggestion what can be the issue?

[aschuler]

Okay I could solve it already by disable/enable the VLAN interface.

[michael]

i have been pulling my hair out with a similar problem and turning it on and off again worked, thanks