one way hearing call oxe R12

[anisbou]

hi
in some cases external calls are one way heard but internal calls are always ok
can you please explain what's the meaning of this incident on my OXE R12 and if it can be due to the same problem

"06/11/20 12:04:48 000001M|019/00/0/001|=4:2011=Plus d'IT entre CR 2 et CR 3 ou plus de ressource de conf▒rence"

[sadim]

Hi,
Command "config all" should help you to identify the issue.

BRegards

[anisbou]

06/11/20 12:04:48 000001M|019/00/0/001|=4:2011=Plus d'IT entre CR 2 et CR 3 ou plus de ressource de conf▒rence


Crystal 19 :

+-------------------------------------------------------------------+
| Cr | cpl| cpl type | hw type | cpl state | coupler ID |
|----|----|------------|-----------|--------------|-----------------|
| 19 | 0 | FICTIF| | REG NOT INIT | NO PCMS CODE |
| 19 | 1 | INTIP3A| | IN SERVICE | NO PCMS CODE |
| 19 | 2 | INTIP3A| | OUT OF SERV | NO PCMS CODE |
| 19 | 3 | Z_FICTIF| | IN SERVICE | NO PCMS CODE |
+-------------------------------------------------------------------+
can you please tell me why the INTIP3A board on position 19-2 Is OUT OF SERV ,is this the issue?

[sadim]

Hi,
That is normal, so, this can not be the root cause of the issue
BRegards

[frank]

How many compressors do you have between your crystals ?