While implementing zmodem,os6900 default language changed

[ramandeep]

As i am implementing zmodem procedure,
setenv baudrate 115200
saveenv
boot
then i restored it back to 9600
Meanwhile i rebooted the switch 6-7 times and its default language changed.
Please help me to change it back to english.

[silvio]

this isn't a different language - the reason is the wrong baudrate. Change the baudrade at your PC to all possible entries (9600....115000). One will be the correct one and you will see all fine
.

[ramandeep]

Dear Silvio,

I have tried all possible entries in my PC but not successful. I am able to write the commands in 9600 baud rate in miniboot in different language.
English language is not displaying.

[silvio]

reboot the switch, take other PC.....
=> printenv output of all settings
and .... setenv *** to change settings

[ramandeep]

Dear Silvio,

There is issue with Teraterm terminal. After pressing "Reset Terminal/reset port" English language is displayed.
Thanks for your support.

[silvio]

thanks for sharing the solution.
regards
Silvio