OXO - MIPT

torrentula · Post by **torrentula** » 21 Jul 2008 21:51

I am installing my first OXO with MIPT and am having a problem with the phones registering.

I have the SVP server and WLAN configured, this seems to be working properly. The error I am getting on the 610's while booting up is bad lanpbx-mipt file or something like that.

The SVP server is on the same subnet as the OXO and I have tested network connectivity, that is all okay.

i have the 610 user programmed and mac-address set in programming. Is there something I need to do on the OXO to create this lanpbx-mipt file like on the OXE?

Any help is appreciated, thanks!

torrentula · Post by **torrentula** » 23 Jul 2008 15:38

Just to update, you must use the Co-CPU as the TFTP address on the MIPT phones...

Post by **tot3nkopf** » 25 Jul 2008 15:22

torrentula wrote:Just to update, you must use the Co-CPU as the TFTP address on the MIPT phones...

like on IP phones

feddy006 · Post by **feddy006** » 27 Jul 2008 14:47

Hi I would like to know if a External DHCP server is is implemented, If its a 2003 server Please Provide the Bootfile name under the Scope options. It must be lanpbxmipt.cfg. Hope it helps you ....

torrentula · Post by **torrentula** » 27 Jul 2008 23:24

like on IP phones

So if you have a large installation with multiple co-cpu's, how does that work? Do you always enter the master co-cpu as the tftp?

Alcatel Unleashed

OXO - MIPT

OXO - MIPT

Re: OXO - MIPT

Re: OXO - MIPT

Re: OXO - MIPT

Re: OXO - MIPT