Both power supplies on the 7210 SAS-MXP are indicated as not equipped.

[filipgermenji]

Hello
I'm encountering an unusual situation with the 7210 SAS-MXP power supply. This switch has two power supplies: one AC 220V and one DC. Both power supplies are showing as "not equipped," yet the switch is operating normally.
The same issue occurs even when change position of PS, even if i replace the PS with one from another switch.

# show chassis power-supply
===================================
Chassis Information
====================================
Power Supply Information
Number of power supplies : 2

Power supply number : 1
Configured power supply type : ac single
Status : not equipped

Power supply number : 2
Configured power supply type : dc (-48V)
Status : not equipped
Input power : out of range
Output power : out of range
=======================================

# show system alarms
===============================================================================
Alarms [Critical:0 Major:2 Minor:0 Warning:0 Total:2]
===============================================================================
Index Date/Time Severity Alarm Resource
Details
-------------------------------------------------------------------------------
1298 2024/08/25 13:33:52.30 MAJOR 7-2011-1 Power Supply 1
Power supply 1, power lost

442 2024/08/19 05:09:44.30 MAJOR 7-2011-1 Power Supply 2
Power supply 2, power lost


# show version
TiMOS-B-20.9.R5 both/hops Nokia SAS-Mxp 22F2C 4SFP+ 7210 Copyright (c) 2000-2021 Nokia.
All rights reserved. All use subject to applicable license agreements.
Built on Wed Aug 25 12:46:54 IST 2021 by sasbuild in /home/sasbuild/20.9B1/R5/panos/main

# show chassis
Type : 7210 SAS-Mxp 22F2C 4SFP+-1
Part number : 3HE10075ABRB01

Has anyone else encountered this situation, and what are recommendations for this issue?