External battries recomended for OXO pabx system

[shirantha]

Hi

Please explain me following questions?



· Oxo babx system recommended to external battries·

How to install external batteries ( 100/50/25VPV’s)

· External Battery charging voltages

· External Battery connecting procedures

· Removing internal batteries ( How is the shutdown process)

Please explain me

Thanks,

Shirantha

[shirantha]

Hi

The internal battries use for oxo shutdown prosses,,

we have to remove internal battries & stapper to select external battries so

oxo pabs suddanly off the power failer & external battries week

Is it crrect or not ?

Shirantha

[Krusty65]

Moved the thread into an appropriate location

Hi

The internal battries use for oxo shutdown prosses,,

we have to remove internal battries & stapper to select external battries so

oxo pabs suddanly off the power failer & external battries week

Is it crrect or not ?

Shirantha

You are correct the internal batteries are only there to allow the OxO to shutdown properly if the power is lost.

You will have to order the external battery kit which comes with the necessary cables and instructions for removing the internal batteries and installing the cables to allow connection to the new external battery box.

K.

[vad]

For system shutdown - press power button on CPU board, wait when power LED will be red. After you can dissconect power cord.

[MTConsulting]

Save your money and buy a proper small UPS, it will also give surge protection and brown out protection.

[johar.mohammed]

Hi,
OXO system recommended to external battries as shown below
1.Compact OXO system ---No External batteries Purely will run through UPS
2. S cabinet--12 Volt 7Ah 2-Batteries (two parallel batteries connections)
3. M cabinet-12 Volt 7 Ah-4-Batteries ( Four parallel batteries connections)
4. L cabinet--36 Volt 7 Ah-6 Batteries ( Three batteries in serial two set and then parellel)

shutdown is simple by off the switch of CPU.

regards
johar