Page 1 of 1
Not authorised to call the pilot with DISA ???
Posted: 13 Jul 2006 02:31
by CW
Hi there
I couldn't call the pilot with DISA, it says "the number you've dialed is not authourised, please ask your system manager".
I can call in to the company with DISA and is able to reach to other internal extension but when I tried to call the pilot, I was prompted the above voice guide. I have checked the connection categories and it seems to be ok. Anybody has any idea about this? Please help.
Many thanks!
Posted: 13 Jul 2006 03:22
by vad
In usual case you cannot dial pilot from internal set. If you want to dial pilot internally - you must create hybrid link (to another network) with two hybrid access with b-channel signaling. In this case you can dial pilot number from internal set (and maybe from DISA too).
Posted: 13 Jul 2006 11:53
by frank
Under ABC-F menu create a new hybrid link
+-Review/Modify: Logical Links (ABC-F)-----------------+
¦ ¦
¦ Node Number (reserved) : 20 ¦
¦ Instance (reserved) : 1 ¦
¦ Link Name : CCD LOOP ¦
¦ ¦
¦ Link Type + Hybrid ¦
¦ Adjacent Node : 20 ¦
¦ Adjacent Network : 10 ¦
¦ Trunk COS : 18 ¦
¦ B Channel Choice + YES ¦
¦ TS Overflow + YES ¦
¦ Monitored by CSTA + False ¦
¦ Incidents Teleservice + YES ¦
¦ Signal Establis.Mode + Permanent User ¦
¦ Routing Type + Dynamic Routing ¦
¦ TS Distribution on Accesses + YES ¦
¦ Multi access hybrid link + YES ¦
¦ MUX presence + NO ¦
¦ ¦
+------------------------------------------------------+
descend hierarchie
+-Review/Modify: Hybrid Link Access----------------------------+
¦ ¦
¦ Node Number (reserved) : 20 ¦
¦ Instance (reserved) : 1 ¦
¦ Link Name : CCD LOOP ¦
¦ Access number : 1 ¦
¦ ¦
¦ Physical address main access : 5-0-8 ¦
¦ Signaling type + B Channel ¦
¦ Main established tempo : 30 ¦
¦ Access Cluster Id : 11 ¦
¦ Has StandBy Signaling + False ¦
¦ StandBy Signaling Type + Unused ¦
¦ Network Date Time Update + NO ¦
¦ Called Number : -------------------- ¦
¦ ¦
+--------------------------------------------------------------+
+-Review/Modify: Hybrid Link Access----------------------------+
¦ ¦
¦ Node Number (reserved) : 20 ¦
¦ Instance (reserved) : 1 ¦
¦ Link Name : CCD LOOP ¦
¦ Access number : 2 ¦
¦ ¦
¦ Physical address main access : 5-0-9 ¦
¦ Signaling type + B Channel ¦
¦ Main established tempo : 30 ¦
¦ Access Cluster Id : 12 ¦
¦ Has StandBy Signaling + False ¦
¦ StandBy Signaling Type + Unused ¦
¦ Network Date Time Update + NO ¦
¦ Called Number : -------------------- ¦
¦ ¦
+--------------------------------------------------------------+