Analog GSM GW ACCESS not released when routed to IAAtendant
Posted: 30 Oct 2009 05:45
I have 2 Analog GSM GWs.
Each of them has 2 analog interfaces, connected to APA8 board which is at position 7 in shelf 2.
I also have Integrated Automated Attendant.
The gates are in trunk group 81 and 82 respectively and in the CDT there is routing to the IAA.
I have tested all and it works fine.
Currently I have problem. The first access of gate 82 is busy all the time. Nobody is using it for conversation, but it is busy.
>trkstat -r 82 outputs the following all the time:
I checked with the command listincall and it returns the following:
As a conclusion I thin that what might happen is one of the following:
1. When there is external call to some GSM GW and it routes to the IAA, the call is not released after the external party hangs up.
2. Someone has forwarded his phone to his GSM and again the call is not released after the external party hangsup.
I believe it is most likely my first guess, for IAA is all about voiceguides, which I guess 541 is - a neqt number of voiceguide.
Have someone had such issues? What does MOI and RCL mean under the link name column?
Each of them has 2 analog interfaces, connected to APA8 board which is at position 7 in shelf 2.
I also have Integrated Automated Attendant.
The gates are in trunk group 81 and 82 respectively and in the CDT there is routing to the IAA.
I have tested all and it works fine.
Currently I have problem. The first access of gate 82 is busy all the time. Nobody is using it for conversation, but it is busy.
>trkstat -r 82 outputs the following all the time:
Code: Select all
+==============================================================================+
| T R U N K S T A T E Trunk group number : 82 |
| Trunk group name : MTEL2 |
| Number of Trunks : 2 |
+------------------------------------------------------------------------------+
| Index : 1 2 |
| Neqt : 455 456 |
| State : B F |
+------------------------------------------------------------------------------+
| F: Free | B: Busy | Ct: busy Comp trunk | Cl: busy Comp link |
| WB: Busy Without B Channel| Cr: busy Comp trunk for RLIO inter-ACT link |
| WBD: Data Transparency without chan.| WBM: Modem transparency without chan. |
| D: Data Transparency | M: Modem transparency |
+------------------------------------------------------------------------------+
Code: Select all
(1)xa000001> listincall 2 7
Fri Oct 30 12:37:42 EET 2009
+-----------------------------------------------------------------------------+
| : : : | | | |ST| partner one info |
| C:cp:ac:ter| neqt| typ term | dir_nb |AT|------------------------------|
| : : : | | | |US| link name | neqt | dir nb |
|-----------------------------------------------------------------------------|
| 2: 7: 0: 2| 0455| JONCT | |IS| RCL| 541| |
+-----------------------------------------------------------------------------+
+-----------------------------------------------------------------------------+
| Nombre total de terminaux en com hors service : 0 |
| Nombre total de terminaux en com en service : 1 |
+-----------------------------------------------------------------------------+
(1)xa000001> listincall 2 27
Fri Oct 30 12:38:14 EET 2009
|Coupler: 2 27 Logic type: CPL_GPA Board: GPA FI State: IN SERVICE |
+-----------------------------------------------------------------------------+
| : : : | | | |ST| partner one info |
| C:cp:ac:ter| neqt| typ term | dir_nb |AT|------------------------------|
| : : : | | | |US| link name | neqt | dir nb |
|-----------------------------------------------------------------------------|
| 2:27: 0: 1| 0494| VG_CHAN | |IS| MOI | 494| |
| 2:27: 0: 64| 0541| DSP_CHAN | |IS| RCL| 455| |
+-----------------------------------------------------------------------------+
+-----------------------------------------------------------------------------+
| Nombre total de terminaux en com hors service : 0 |
| Nombre total de terminaux en com en service : 2 |
+-----------------------------------------------------------------------------+
As a conclusion I thin that what might happen is one of the following:
1. When there is external call to some GSM GW and it routes to the IAA, the call is not released after the external party hangs up.
2. Someone has forwarded his phone to his GSM and again the call is not released after the external party hangsup.
I believe it is most likely my first guess, for IAA is all about voiceguides, which I guess 541 is - a neqt number of voiceguide.
Have someone had such issues? What does MOI and RCL mean under the link name column?